Canyon router wireless WF514

Hello,
I have a Canyon WF514 router, I can't connect with my Blackberry curve 8520, I can connect fine with the laptop and I can connect with the Blackberry to other wireless, I upgraded the firmware to the last update,I tried to change channels, I tried to reset the router, I tried loads of stuff!! I'm sure the problem is the router but I don't understand what it is.
Any suggestion??Pleaseeeeeeeeeeeee

Reply 1 : Canyon router wireless WF514

I see nothing about the wifi settings. Some hide the SSID and then things won't connect. Some use WEP or no security.

Your post is light. Try finishing it with the details. Remember these are discussion forums with no paid staff so it's up to you to tell all.
Bob

Reply 2 : Canyon router wireless WF514

Well I can actually connect but it won't get connection to the internet, so I can't actually see pages and download, it's not the blackberry's settings because I can connect with other router perfectly
I'm sure the problem is the router but I don't understand what it is.
I'm using a Canyon WF-514 and a Blackberry 8520, I'm in AP mode and i'm using a WPA pre-shared key,there are actually other 4 laptop connected to the router so it is working perfectly.
Band : 2.4 ghz(b+g)
Authentication Type : Auto
Fragment Threshold : 2346
RTS Threshold : 2347
Beacon Interval : 100
Data Rate : Auto
Preamble Type : Long Preamble
Broadcast ESSID : Enabled
IAPP : Enabled
802.11g Protection : Disabled
802.1d Spanning Tree : Disabled
DHCP Server : Enabled
Network Address Translation (NAT): Enabled
UPnP Feature : Disabled
Firewall Disabled

Also I can see the Blackberry connected on the router page with MAC address and IP address.

Hope this helps, I don't have a clue of what it could be
Please help meeee

Reply 3 : Canyon router wireless WF514

And the router looks to not be in stock form.

802.11g Protection : Disabled
802.1d Spanning Tree : Disabled
DHCP Server : Enabled
Network Address Translation (NAT): Enabled
UPnP Feature : Disabled
Firewall Disabled

And that first item looks to disagree with your WPA statement.
The UPNP is needed sometimes.

I'd try the routers defaults with the bare minimum changes to get it connected to your ISP.

If not, try another router as you know other routers work.
Bob

Reply 4 : Canyon router wireless WF514

The router is already on default settings,802.11g Protection was enabled too and it didn't work, I tried already with different router and it's working perfectly, also with an Ipod touch it doens't allow me to connect, so apparently the problem is with the smartphones, there is something on the router settings that I can't understand,UPnP Feature was enabled too before and it wasn't working, so now it's disabled after I put the default settings. I really don't know what to do.

Reply 5 : Canyon router wireless WF514

Since other routers work, you need one of those other routers. You seem to have tried the usual but this maker is not a NAME and I see they archived the site so it's doubtful any updates will fix it.

Sorry to read that it didn't work with the BB.
Bob

Reply 6 : Canyon router wireless WF514

I'm having the same problem with an Encore ENHWI-G2 router. So far i could get some internet connection by changing the Beacon Interval to 20 or 50. I red RIM uses 50, but in my case it works better when it's on 20. However, it doesn't work properly. It can open web pages sometimes and receive pin messages, but after a short time, it stops downloading. I know it's almost a year since you posted this, but it'd be nice to know if you could fix this issue...